Sun-microsystems X4150 Manuel d'utilisateur Page 51
- Page / 82
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Chapter 3 Setting Up the Sun Fire X4150 Server 41
9. Record your settings.
10. Log out.
11. If the IP address changes, you must reconnect using the newly assigned IP
address, because the current session will become unresponsive.
Refer to the following documentation for detailed information on using the LOM
interface.
ELOM: Embedded Lights Out Manager (ELOM) Administration Guide
ILOM: Sun Integrated Lights Out Manager Users Guide
Applying Power for the First Time
To turn on the server for the first time:
1. Verify that the power cord has been connected and that standby power is on.
In standby power mode, the Power/OK LED on the front panel flashes. See
FIGURE 3-2.
2. Verify that you are connected to the server through the serial management port,
perform the following sub-steps:
a. Connect a terminal (or a PC running terminal emulation software) to the
server serial port.
b. Ensure that the server hardware is installed and cables are inserted.
c. Verify that your terminal, laptop, PC, or terminal server is operational.
d. Configure the terminal device or the terminal emulation software running on
a laptop or PC to the following settings:
■ 8,N,1: eight data bits, no parity, one stop bit
■ 9600 baud
■ Disable hardware flow control (CTS/RTS)
■ Disable software flow control (XON/XOFF)
e. Connect a null serial modem cable from the server’s back panel serial
management port to a terminal device (if not connected already).
See
FIGURE 1-4 for the serial port position.
- Sun Fire 1
- X4150 Server 1
- Installation Guide 1
- Contents 3
- Contents v 5
- Power On the Main Power 65 6
- Setup Troubleshooting 67 6
- Contacting Support 68 6
- How This Book Is Organized 7
- Typographic Conventions 8
- Sun Online 8
- Related Documentation 9
- Sun Welcomes Your Comments 10
- Before You Begin 11
- Chapter 1 Before You Begin 3 13
- Unpacking the Boxes 14
- Antistatic Precautions 15
- Front Panel Features 16
- Back Panel 17
- Into a Rack with Slide-Rails 19
- Before You Install the Server 19
- Service Label 20
- Checking Compatibility 20
- Installation 21
- Mounting-bracket 22
- Slide-rail lock 22
- FIGURE 2-2.) 23
- FIGURE 2-3.) 24
- FIGURE 2-4.) 25
- Setting the Rail Width 26
- Rail-width spacer 26
- Assemblies 27
- FIGURE 2-6.) 28
- Cable Management Arm (CMA) 29
- CMA rail 29
- Left slide-rail 30
- Right slide-rail 32
- CMA mounting 32
- FIGURE 2-12.) 34
- Installing CMA Cable Straps 35
- CMA cable hanger 35
- Connecting the Cables 38
- Cabling the Server 39
- Service Processor Overview 40
- Item Port Function 41
- Overview 42
- Connecting to the LOM Service 43
- Processor for the First Time 43
- IP Address 44
- ■ 9600 baud 45
- Method 1: Using the BIOS 47
- Example 1 48
- Example 2 49
- Web Browser Interface 50
- FIGURE 3-2 51
- Configuring the Preinstalled 55
- Solaris 10 Operating System 55
- Installation Worksheet 57
- Configuring the Solaris OS 59
- (Optional) 60
- Using the GRUB Menu 60
- RAID Drive Overview 61
- RAID Drive Options 62
- TABLE 4-3, only IM 63
- TABLE 4-3 64
- Information 65
- Solaris 10 OS Training 66
- Windows Server 2003 R2 67
- Operating System 67
- R2 Operating System 68
- R2 OS with LSI RAID 72
- TABLE 5-2 73
- If You Need Help 75
- Front Panel Power/OK LED 76
- Shutdown 76
- Setup Troubleshooting 77
- Contacting Support 78
Produits connexes et manuels pour Ordinateurs Sun-microsystems X4150
(34 pages)
(22 pages)Powermate 024-0077CT Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Elektrische Schraubenschlüssel Powermate 024-0077CT.
Wir stellen 1 PDF-Handbücher Powermate 024-0077CT zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Commentaires sur ces manuels