Sun-microsystems X4150 Manuel d'utilisateur télécharger pdf (Page 22)

12 Sun Fire X4150 Server Installation Guide • May 2009

Disassembling Bolt-On Slide-Rails

To remove the mounting-brackets from the bolt-on slide-rail assemblies:

1. Unpack the slide-rails.

2. Locate the slide-rail lock at the front of one of the slide-rail assemblies, as

shown in

FIGURE 2-1.

3. Squeeze and hold the tabs at the top and bottom of the lock while you pull the

mounting-bracket out of the slide-rail assembly until it reaches the stop. (See

FIGURE 2-1).

4. Push the mounting-bracket release button toward the front of the mounting-

bracket, as shown in

FIGURE 2-1, and simultaneously withdraw the mounting-

bracket from the slide-rail assembly.

5. Repeat for the remaining slide-rail assembly.

FIGURE 2-1 Disassembling the Bolt-on Slide-rail Before Installation

Disassembling Tool-less Slide-Rails

To remove the mounting-brackets from the tool-less slide-rail assemblies, refer to the

install card instructions included with the kit.

Mounting-bracket

release button

Slide-rail lock

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 81 82

Pas de commentaire

Sun-microsystems X4150 Manuel d'utilisateur Page 22