Sun Microsystems X2250 Manuel d'utilisateur télécharger pdf (Page 77)

Chapter 4 Maintaining the Sun Fire X2250 Server 4-29

■ DIMM pairs must be populated in the following DIMM slot order: A0 & B0, C0 &

D0, A1 & B1, C1 & D1.

■ Blue DIMM sockets are always populated first. Largest modules are always

populated first before smaller module sizes.

4.5.10.2 Removing a DIMM

To remove a DIMM:

1. Power off the system and remove the cover as described in Section 4.3,

“Powering Off the Server and Removing the Cover” on page 4-3.

2. Locate the DIMM connector in which you will install or replace a memory

module.

Bank 0 is the bank closest to CPU 0 and Bank 1 is the bank closest to CPU 1. See

FIGURE 4-26 and FIGURE 4-27.

FIGURE 4-26 Bank 0 DIMM Slot Locations

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 133 134

Pas de commentaire

Sun Microsystems X2250 Manuel d'utilisateur Page 77