Sun-microsystems SUN NETRA CP3000 Manuel d'utilisateur Page 49

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 72
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 48
Chapter 4 Configuring the AMC 4-3
4.2.1 Features and Configurations
The Boot BIOS supports the following:
Using multiple AMC.1 SAS modules
Applying global properties stored in flash
Selecting and configure up to 256 adapters
Automatic INT13 drive mapping for SAS drives
SAS topology discovery, including expander traversal
Applying PHY transceiver properties
4.2.2 Launching the Boot BIOS Utility
Note Not all devices detected by the utility can be controlled by the BIOS. Devices
such as tape drives and scanners require loading a device driver specific to that
peripheral device.
1. Initiate loading of the BIOS, and watch for the following message.
Press Ctrl-C to start LSI Configuration Utility...
This message remains on your screen for about five seconds, giving you time to
start the utility.
2. Press CTRL C.
Please wait, invoking LSI Configuration Utility...
After a brief pause, the Boot BIOS Main menu is displayed, as shown in the
following figure.
Vue de la page 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

Commentaires sur ces manuels

Pas de commentaire