Sun-microsystems Ethernet MMF/UTP Adapter Manuel d'utilisateur télécharger pdf (Page 95)

Chapter 5 Configuring VLANs 61

2. Use the ifconfig(1M) to configure a VLAN virtual device, for example:

The output of ifconfig -a on a system having VLAN devices ipge123000 and

ipge224000:

3. On the switch, set VLAN tagging and set VLAN ports to coincide with the VLANs

you have set up on the server.

Using the examples in Step 2, you would set up VLAN ports 123 and 224 on the

switch.

Refer to the documentation that came with your switch for specific instructions for

setting VLAN tagging and ports.

# ifconfig ipge123000 plumb up

# ifconfig ipge4000 plumb up

# ifconfig -a

ipge4000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500

index 5

inet 0.0.0.0 netmask ff000000

ether 0:3:ba:d8:d3:a6

ipge123000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500

index 4

inet 0.0.0.0 netmask ff000000

ether 0:3:ba:d8:d3:a6

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 121 122

Pas de commentaire

Sun-microsystems Ethernet MMF/UTP Adapter Manuel d'utilisateur Page 95