Sun-microsystems 2.0 Manuel d'utilisateur télécharger pdf (Page 17)

2-1

InstallingtheAdapter

This chapter tells you how to install the adapter in your system and verify that

the adapter is correctly installed.

2.1 PerformingtheInstallation

Note – Refer to your system installation or service manual for detailed

instructions for the following tasks.

1. Power off your system, using the standard shutdown procedures

described in Solaris 2.x Handbook for SMCC Peripherals.

2. If you are replacing an SBus card with the SunFastEthernet Adapter,

remove the old card now.

3. Install the SunFastEthernet Adapter in the selected SBus slot.

4. Connect the Ethernet cable to the SunFastEthernet Adapter and to the

hub.

Note – Make sure you have an Ethernet cable for each interface.

5. Connect the MII device to the SunFastEthernet Adapter.

6. Connect the external transceiver to its appropriate hub.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Pas de commentaire

Sun-microsystems 2.0 Manuel d'utilisateur Page 17