Sun-microsystems 2000E Manuel d'utilisateur télécharger pdf (Page 20)

2-4 SPARCserver2000E Power SupplyInstallationManual—April1995

2.4 Access

Remove all system cover panels before proceeding with the upgrade. For these

procedures, refer to Appendix A, “Access.”

2.5 InstallingtheBottomPowerSupply

Note – Read and follow all safety and ESD instructions found in Section 1.1,

“Safety Precautions.”

2.5.1 Identifying a Redundant-Capable Cabinet

Note – The cabinet in question is a redundant-capable cabinet if:

• The power supply cover panel on this chassis is long as shown in Figure 2-3.

This panel reaches to the bottom of the frame. In contrast, the cover panel on

the non redundant-capable chassis reaches about half the way down the frame

• The cabinet is configured with the power supply adapter board. This board,

if present, can be viewed by looking through the EMI screen on the front of the

system.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 53 54

Pas de commentaire

Sun-microsystems 2000E Manuel d'utilisateur Page 20