Sun-microsystems Ethernet PCI-X Adapter Manuel d'utilisateur télécharger pdf (Page 45)

Chapter 3 Configuring Driver Parameters 29

10-Gigabit Ethernet Driver Operating

Statistics

These statistics are part of the statistics presented by the kstat command.

TABLE 3-5 describes the read-only Media Independent Interface (MII) capabilities.

These parameters define the capabilities of the hardware. The Gigabit Media

Independent Interface (GMII) supports all of the following capabilities.

TABLE 3-5 Read-Only ixge Device Capabilities

Parameter Description (Local interface Capabilities)

cap_autoneg 0 = Not capable of autonegotiation

1 = Autonegotiation capable

cap_10gfdx Local interface full-duplex capability

0 = Not 10000 Mbit/sec full-duplex capable

1 = 10000 Mbit/sec full-duplex capable

cap_10ghdx Local interface half-duplex capability

0 = Not 10000 Mbit/sec half-duplex capable

1 = 10000 Mbit/sec half-duplex capable

cap_1000fdx Local interface full-duplex capability

0 = Not 1000 Mbit/sec full-duplex capable

1 = 1000 Mbit/sec full-duplex capable

cap_1000hdx Local interface half-duplex capability

0 = Not 1000 Mbit/sec half-duplex capable

1 = 1000 Mbit/sec half-duplex capable

cap_100fdx Local interface full-duplex capability

0 = Not 100 Mbit/sec full-duplex capable

1 = 100 Mbit/sec full-duplex capable

cap_100hdx Local interface half-duplex capability

0 = Not 100 Mbit/sec half-duplex capable

1 = 100 Mbit/sec half-duplex capable

cap_10fdx Local interface full-duplex capability

0 = Not 10 Mbit/sec full-duplex capable

1 = 10 Mbit/sec full-duplex capable

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 77 78

Pas de commentaire

Sun-microsystems Ethernet PCI-X Adapter Manuel d'utilisateur Page 45