Sun-microsystems X6450 Manuel d'utilisateur télécharger pdf (Page 29)

CHAPTER

Installing and Configuring the

Server Module

This chapter provides instructions for installing and configuring the server module.

It contains the following sections:

■ “Inserting the Server Module” on page 19

■ “Accessing and Configuring the ILOM Service Processor” on page 22

■ “Accessing the System Console” on page 29

■ “Dongle Cable Connections” on page 33

Inserting the Server Module

Caution – Before handling components, attach an electrostatic discharge (ESD)

wrist strap to bare metal on the chassis. Both the front and back of the chassis have

grounded locations. The system’s printed circuit boards contain components that are

extremely sensitive to static electricity.

▼ To Insert the Server Module

1. Locate the desired slot in the chassis.

2. Remove the filler panel.

Pull the lever out and eject the filler panel.

Do not discard the filler panel.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 49 50

Pas de commentaire

Sun-microsystems X6450 Manuel d'utilisateur Page 29