Sun Microsystems X6270 Manuel d'utilisateur télécharger pdf (Page 30)

18 Sun Blade X6270 Server Module Installation Guide • December 2009

▼ Install DIMMs

1. Remove the cover from the server.

See “Remove Cover From Server” on page 11.

2. Remove the DIMM filler panel.

See “Remove or Insert Filler Panels” on page 12.

3. To install a DIMM, do the following:

a. Determine the DIMM socket location to populate.

See “DIMM Population Rules” on page 16.

b. Ensure that the DIMM ejector levers are open (angled outward).

See ejector lever position in

FIGURE 2-4.

c. Align the DIMM notch to the DIMM connector key.

d. Using both thumbs, press the DIMM straight down into the DIMM

connector slot until both ejector levers close, locking the DIMM in the

socket.

Note – The DIMM must be inserted evenly, straight down into the DIMM connector

slot, until the ejector levers lock into place.

TABLE 2-3 DIMM Classification Labels

Rank Classification Label

Quad-rank DIMM 4Rx4

Dual-rank DIMM 2Rx4

Single-rank DIMM 1Rx4

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 99 100

Pas de commentaire

Sun Microsystems X6270 Manuel d'utilisateur Page 30